在设备实际操作运行过程中,全自动混凝土搅拌车的变速器是一个非常重要的部件。因此,我们在使用过程中对其油质需要有一定的检测工作,那么我们具体应该怎么进行操作呢?
In the actual operation of the equipment, the transmission of automatic concrete mixer is a very important part. Therefore, we need to test the oil quality in the process of use, so how should we operate?
1、将全自动混凝土搅拌车停放在水平地面上,并拉紧手制动。
1. Park the full-automatic concrete mixer on the horizontal ground and tighten the hand brake.
2、让发动机怠速运转数分钟。
2. Let the engine idle for a few minutes.
3、踩住制动踏板,将操纵手柄拨倒挡、前进挡等位置,并在每个挡位上停留几秒钟,使液力变矩器和所有换挡执行元件中都充满液压油。然后将操纵手柄拨停车挡位置。
3. Step on the brake pedal, turn the control handle to the reverse gear, forward gear and other positions, and stay at each gear for several seconds, so that the hydraulic torque converter and all shift actuators are filled with hydraulic oil. Then turn the joystick to the park position.
4、从加油管内拨出自动变速器油尺,将擦干净的油尺全部插入加油管再拔出,检查油尺上的油面高度。
4. Pull out the automatic transmission dipstick from the oil filler tube, insert all the wiped dipstick into the filler pipe and pull it out again. Check the oil level on the dipstick.
在对全自动混凝土搅拌车变速器进行检查或故障诊断前,要对变速器油面和油质进行检查。把选挡手柄放在P位,将发动机在怠速时少运转数分钟,油液达到正常工作温度,汽车必须停放在水平路面上,这样才能确保在差速器和变速器之间的油面高度正常、稳定。
The oil level and oil quality of the transmission should be checked before the transmission of automatic concrete mixer is inspected or diagnosed. Put the gear selection handle on the P position and run the engine at idle speed for at least several minutes. The oil reaches the normal working temperature. The car must be parked on the horizontal road surface, so as to ensure the normal and stable oil level between the differential and transmission.