自动混凝土搅拌车的定期维护_行业资讯_自动混凝土搅拌机知识_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

自动混凝土搅拌机知识

公司新闻行业资讯

热点

水泥搅拌车的用车养车要注意哪些情况？

2020-09-10

自上料搅拌车筛网叶片出现故障需及时维修

2022-05-16

平口搅拌车配件怎么做防腐处理？

2021-06-07

如何提高混凝土搅拌机工作效率？

2021-04-10

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

自动混凝土搅拌车的定期维护

所属分类：行业资讯发布时间：2022-12-23 来源：http://www.sqjituan.cn/ 浏览量：0

定期维护自动混凝土搅拌车密封条：
Regularly maintain the sealing strip of automatic concrete mixer:
小型搅拌机门的自动加载以及焊接实际都是粘在密封条上，这也是保证密封的操作。不然，这些缝隙很简单被外面的风沙沙粒填满，引起腐蚀等。检查小型搅拌机密封是否有大的裂缝。今天，我想与您分享密封条的日常维护。
The automatic loading and welding of the small mixer door are actually stuck to the sealing strip, which is also the operation to ensure the sealing. Otherwise, these gaps are simply filled with wind blown sand particles outside, causing corrosion, etc. Check the seal of the small mixer for large cracks. Today, I want to share with you the daily maintenance of the sealing strip.
1.查看自动混凝土搅拌车的密封件是否有大的裂缝。如果密封破损，可以使用粘合剂修正。特别是，在密封件上使用粘合剂能够轻松填充较大的裂缝区域。当然，如果密封件严重损坏或老化程度很大，请替换新的密封件。
1. Check whether the seals of the automatic concrete mixer have large cracks. If the seal is broken, it can be corrected with adhesive. In particular, the use of adhesives on seals can easily fill large crack areas. Of course, if the seal is seriously damaged or greatly aged, please replace it with a new one.
2.在驾驶员用混凝土混合清洁剂清洁门窗密封条之后，应涂一层渗透防护剂，从而避免密封条老化，并明显提高了密封条的密封作用。另外，密封条之间的空隙很容易充满尘埃和锈蚀。为此，您需要使用刷子铲除尘埃。
2. After the driver cleans the door and window sealing strip with concrete mixed detergent, a layer of penetration protective agent shall be applied to avoid the aging of the sealing strip and significantly improve the sealing effect of the sealing strip. In addition, the gap between the sealing strips is easily filled with dust and rust. To do this, you need to use a brush to remove the dust.
3.替换整个机身时，有必要在焊接部分的堆叠部分涂一层密封剂。粘合剂层的厚度约为1mm，而且粘合剂层必须没有不适当的粘合，气泡和其他缺点。地板的整个底面和前轮盖的底面应涂3mm-4mm的弹性涂层和防腐涂层。这些措施不只明显进步了车身的密封功用，减缓了车身的腐蚀速度，而且大大进步了乘坐舒适性。
3. When replacing the whole fuselage, it is necessary to apply a layer of sealant on the stacked part of the welding part. The thickness of the adhesive layer is about 1mm, and the adhesive layer must be free from improper adhesion, bubbles and other defects. The whole bottom surface of the floor and the bottom surface of the front wheel cover shall be coated with 3mm-4mm elastic coating and anti-corrosion coating. These measures not only significantly improve the sealing function of the body, slow down the corrosion rate of the body, but also greatly improve the ride comfort.

4.密封门和车身是一个相对困难的部分。密封要求相对严厉。需要密封的部分相对较长，要密封的部分的横截面形状不相同，而且门常常被翻开和关闭。在混凝土搅拌车上安装三通四通密封垫，并在安装前支柱和顶梁侧梁的四密封结构。这种类型的多通道密封一般放置在前门之间的空隙中，除了具有密封功用外，还具有减少车辆噪音的效果。
4. Sealing door and body is a relatively difficult part. The sealing requirements are relatively strict. The part to be sealed is relatively long, the cross section shape of the part to be sealed is different, and the door is often opened and closed. Install the three-way and four-way sealing gasket on the concrete mixer truck, and install the four-way sealing structure of the front pillar and the top beam side beam. This type of multi-channel seal is generally placed in the gap between the front doors. In addition to its sealing function, it also has the effect of reducing vehicle noise.
以上就是为大家介绍的有关自动混凝土搅拌车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sqjituan.cn
The above is a detailed introduction to the automatic concrete mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.sqjituan.cn

上一页：下一页：这才是混凝土机械设备该有的样子！

热门产品 / HOT PRODUCT