平口搅拌车上面有一些配件,这些配件需要提前做好防腐处理。才能延长其配件的使用寿命,进而延长平口搅拌车的使用寿命。
There are some accessories on the flat mixer, which need to be treated in advance. Only in this way can the service life of the accessories be extended, and then the service life of the flat mixer be extended.
平口搅拌车配件防腐处理的方法:
Anti corrosion treatment method of flat mixer accessories:
1、利用渗碳、淬火等方法,提高平口搅拌车零件的硬度、韧性和耐磨性,也能收到良好的效果。表现形式:断裂、表面剥落:处理方法:在稳定土拌合站制造过程中提高零件表面的光洁度,采用比较缓和的断面过滤,以减少零件的应力集中。
1. By means of carburizing, quenching and other methods, the hardness, toughness and wear resistance of flat mixer parts can be improved, and good results can also be obtained. Manifestation: fracture, surface spalling: treatment method: improve the surface finish of parts in the manufacturing process of stabilized soil mixing plant, and adopt mild section filtration to reduce the stress concentration of parts.
2、采用耐磨防腐新材料对配件进行一次性耐磨防腐处理,RJ耐磨防腐新材料既可对平口搅拌车配件在未安装前进行一次保护处理,又可对使用时间长、磨损严重,甚漏浆的槽体进行处理,处理后的槽体仍可长期使用,保证其寿命为搅拌配件寿命的数倍。
2. The new wear-resistant and anti-corrosion material RJ can not only protect the flat mixer accessories before installation, but also treat the tank with long service time, serious wear and even slurry leakage. After treatment, the tank can still be used for a long time, and its service life is several times longer than that of the mixing accessories.