通常,诸如自动混凝土搅拌机之类的车辆设备在表面上具有一层油漆,以更好地保护车辆的外部和外部。在正常操作期间,油漆很容易损坏,因此,这是保护搅拌机油漆不受损坏的方法。
In general, vehicle equipment such as automatic concrete mixers have a layer of paint on the surface to better protect the exterior and exterior of the vehicle. During normal operation, the paint is easily damaged, so this is a way to protect the paint from damage.
1.如果您不喜欢自动混凝土搅拌机的涂漆表面,金属漆会开裂得很小,并且会继续渗透到漆层中,直到它渗透到整个漆层中为止。如果裂缝中含有蜡,则身体会变得斑纹。定期打蜡可以逐渐减少裂纹。
1. If you don't like the painted surface of the automatic concrete mixer, the metallic paint will crack very little and continue to penetrate into the paint layer until it penetrates into the whole paint layer. If there is wax in the cracks, the body will become streaked. Regular waxing can gradually reduce cracks.
2.当暴露在阳光下时,自动混凝土搅拌机会不断蒸发,以保护空气中的油。随着时间的流逝,油漆油将变得过度分散。涂漆表面的亮度和深度将大大降低,涂漆表面将逐渐变白,将形成氧化层,并缩短涂层寿命。如果自动进料混合器的涂漆表面被严重氧化,则可以通过研磨和抛光进行处理。
2. When exposed to the sun, the automatic concrete mixer will continuously evaporate to protect the oil in the air. Over time, the paint oil will become over dispersed. The brightness and depth of the painted surface will be greatly reduced, the painted surface will gradually turn white, the oxide layer will be formed, and the coating life will be shortened. If the painted surface of the automatic feed mixer is seriously oxidized, it can be treated by grinding and polishing.
3.自动混凝土搅拌机的表面磨损。它可能是由昆虫,禽粪,树液,柏油或沥青引起的。一些小的蚀刻可以通过研磨和抛光。
3. Surface abrasion of automatic concrete mixer. It may be caused by insects, poultry manure, tree sap, tar or asphalt. Some small etchings can be solved by grinding and polishing.
除了上述方法之外,为了有效地防止油漆溅到车辆上,在驾驶时必须注意驾驶并避免碰撞和摩擦。否则,会发生其他损坏。
In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, we must pay attention to driving and avoid collision and friction. Otherwise, other damage may occur.