混凝土搅拌车在夏天体现书高温高噪声的原因有哪些？_自动混凝土搅拌车_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

自动混凝土搅拌车

热点

混凝土自动上料搅拌车的功能有哪些？适用哪些工程？

2022-11-02

如何避免全自动搅拌车堵料的问题？

2022-02-18

自动搅拌机怎么更换雨刮器？

2020-11-30

自上料搅拌车出现抖动的原因有哪些？

2020-12-04

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土搅拌车在夏天体现书高温高噪声的原因有哪些？

所属分类：自动混凝土搅拌车发布时间：2022-03-22 来源：http://www.sqjituan.cn/ 浏览量：0

在夏天，混凝土自动装料搅拌机的内部噪音和温度会增加。夏季温度不高，但这可能是由于发动机或汽车中机油的温度所致。

In summer, the internal noise and temperature of the automatic concrete loading mixer will increase. The temperature is not high in summer, but this may be due to the temperature of oil in the engine or car.

1.洗车水箱中的水量不足以清理干净。向洗车水箱注满水。

1. The amount of water in the car washing water tank is not enough to clean up. Fill the car wash water tank with water.

2.如果吸管的进气口堵塞或堵塞，可以检查并拧紧吸管。不要呼吸空气。

2. If the air inlet of the straw is blocked or blocked, check and tighten the straw. Don't breathe air.

3.油箱液位过低，并且油液中的空气被吸入泵中。如果发生这种情况，您可以添加带有相同标签的液压油。

3. The liquid level in the oil tank is too low, and the air in the oil is sucked into the pump. If this happens, you can add hydraulic oil with the same label.

4.如果泵的安装支架不够牢固，则在工作期间会产生振动和噪音。在这种情况下，可以加固油泵支架。

4. If the mounting bracket of the pump is not firm enough, vibration and noise will be generated during operation. In this case, the oil pump support can be reinforced.

5.堵塞的滤芯会使吸油困难或不充分。在这种情况下，请清洁滤芯或更换滤芯。

5. Blocked filter element will make oil absorption difficult or insufficient. In this case, clean the filter element or replace the filter element.

6.油冷却风扇未打开。卸下：打开冷却风扇。

6. The oil cooling fan is not turned on. Remove: turn on the cooling fan.

7.如果液压油不符合要求或油太粘，请更换符合标签要求的低粘度液压油。

7. If the hydraulic oil does not meet the requirements or the oil is too viscous, please replace the low viscosity hydraulic oil that meets the label requirements.

8.储罐中有坚硬的混凝土。如果发生这种情况，请及时清理并铲起。

8. There is hard concrete in the tank. If this happens, please clean and shovel it in time.

9.输入万向节轴之间的连接角度以及万向节轴与取力器之间的连接角度太大，如果松开会产生噪音，在这种情况下，请在时间内检查并拧紧。

9. The connection angle between the input universal joint shaft and the connection angle between the universal joint shaft and the power take-off is too large. If it is loosened, it will produce noise. In this case, please check and tighten it within a time.

上一页：混凝土上料搅拌车堵料预防的方法有哪些？下一页：搅拌车的加油系统维护需要怎么做？

热门产品 / HOT PRODUCT