混凝土搅拌车在工作时应注意的问题！_常见问题_自动混凝土搅拌机_自动混凝土搅拌车厂家

站内搜索

常见问题

热点

全自动搅拌车多个举措全力保障施工

2021-11-11

自动混凝土搅拌车损坏后的维修对策

2021-09-03

如何辨别自动上料搅拌车滤芯好坏

2022-04-27

自动上料搅拌车损坏后的维修方法

2022-08-03

关于山汽

联系人：刘老师

电话：400-879-1999

公司：山东山汽工程机械（集团）有限公司

地址：山东省莱州市206国道与308省道交叉口东南50米

混凝土搅拌车在工作时应注意的问题！

所属分类：常见问题发布时间：2021-03-29 来源：http://www.sqjituan.cn/ 浏览量：0

大家都知道混凝土搅拌车在建筑行业已经被大家广泛使用了，但是大家知道它在工作时应注意哪些问题吗？接下来就给大家来具体讲解一下吧。

We all know that concrete mixer has been widely used in the construction industry, but do you know what problems should be paid attention to when it works? Next, let's give you a specific explanation.

1、在施工现场卸料完毕后，应立即用搅拌车随带的软管冲洗进料斗、出料斗、卸料溜槽等处，粘附在车身各处的污泥及混凝土。在返回搅拌站的途中，应向搅拌筒内注150---200L水以清洗筒壁及叶片粘结的混凝土残渣。

1. After unloading at the construction site, the feeding hopper, discharging hopper, discharging chute, etc. shall be washed immediately with the hose attached to the mixer truck to remove the sludge and concrete adhered to the vehicle body. On the way back to the mixing plant, 150-200l water should be injected into the mixing drum to clean the concrete residue bonded on the wall and blades of the drum.

2、每天工作结束后，司机应负责向搅拌筒内注入清水并高速(14—18转/分)旋转5—10分钟，然后将水排去，以保证筒内清洁。用高压水清洗搅拌筒各个部分时，应注意避开仪表及操纵杆等部位。压力水喷嘴与车身油漆表面间的距离不得小于40厘米。

2. At the end of each day's work, the driver shall be responsible for injecting clean water into the mixing drum and rotating at high speed (14-18 RPM) for 5-10 minutes, and then discharging the water to ensure the cleanness of the drum. When using high-pressure water to clean each part of the mixing drum, attention should be paid to avoid the instrument and control rod. The distance between the pressure water nozzle and the body paint surface shall not be less than 40 cm.
自动混凝土搅拌车

3、搅拌筒内外积污及残存的混凝土渣块时，以及在机修人员进入筒内进搅拌行混凝土搅拌车在工作时应注意什么检修和焊补作业时，需先关闭汽车发动机，使搅拌筒完全停止转动。在机修人员进入筒内工作期间，要保证拌筒内通风良好，空气新鲜，无可然气体及有害灰尘，氧气供应充足。在筒内使用电动工具操作时，操作人员要有良好的绝缘保护。

3. When removing the dirt and residual concrete slag inside and outside the mixing drum, and when the maintenance personnel enter the drum for mixing, what should be paid attention to when the concrete mixing truck is working? When repairing and welding, the engine of the truck should be turned off first to stop the mixing drum completely. During the working period, the maintenance personnel should ensure that the mixing cylinder is well ventilated, the air is fresh, there is no natural gas and harmful dust, and the oxygen supply is sufficient. When using electric tools in the cylinder, operators should have good insulation protection.

4、工作时，不得将手伸入旋转的搅拌筒内，严禁将手伸入主卸料溜槽和加长卸料溜槽的连接部位，以免发生事故。

4. When working, do not put your hand into the rotating mixing drum, and do not put your hand into the connecting part of the main discharge chute and the extended discharge chute, so as to avoid accidents.

以上就是给混凝土搅拌车在工作时应注意的问题，相信大家都已经有一定的学习了，希望大家在工作时一定要注意，想了解更多资讯，请继续关注我们的网站：自动混凝土搅拌车http://www.sqjituan.cn

The above is to the concrete mixer in the work should pay attention to the problem, I believe you have a certain learning, I hope you must pay attention to in the work, want to know more information, please continue to pay attention to our website: automatic concrete mixer http://www.sqjituan.cn

上一页：移动型混凝土搅拌车适合用于哪些类型的工程? 下一页：自动混凝土搅拌机防冻液的使用误区有哪些？

热门产品 / HOT PRODUCT